Wavlink WiFi range extenders take signals from host routers and then transmit them to other areas of the house. They are known for their flawless signal transfer and amazing features. But, these days, 7 out of 10 users have been reported facing issues with their Wavlink devices. They say that their Wavlink WiFi extenders keep cutting out. If the case with you is also the same, then first of all, you should look forward to installing the latest firmware version on your wireless range extender by accessing the ap.setup URL. Move to the next section to learn why and how.
Updating Firmware to Resolve Speed and Performance Issue
Every networking device runs on a set of instructions. These instructions are collectively called firmware or software of that device. Being a part of the networking world, a Wavlink extender also works on the same. But, it is never advised to make the device run on the same firmware version every time. It is because when you do so, the extender will start lacking the latest features that are known for improving its efficiency. Thus, keeping the firmware updated should be on your to-do list for home network maintenance. The steps for updating the firmware of the extender are listed below:
-
Download the Firmware File
The first step involved in initiating the Wavlink extender firmware update process is to download the firmware file. Therefore, fire up your favorite internet browser on a tablet or laptop and visit the official site of Wavlink products. From the download center, download the latest firmware version for your extender. The firmware version must strictly correspond to the extender model you own. Apart from this, unzip the file if needed.
-
Access the Wavlink Extender Dashboard
Now, you are required to access the dashboard of your Wavlink extender through the default admin credentials. Once done, click the Setup tab and find the Firmware Update option. There, you will find an option to upload the extender’s firmware file. Thus, locate the same on your PC and select it. At last, upload the file and let the firmware get installed on your WiFi range extender.
As soon as the process is completed, rejoin your client devices to the extender’s network and check whether the WiFi extender keeps cutting out or not. If not, then no further troubleshooting is needed from your end. Otherwise, take the aid of the next section. For your information, if you fail to resolve the issue even after the implementation of the below-mentioned tips, you will be left with the only option of performing the Wavlink WiFi extender setup again.
Solutions: Wavlink WiFi Extender Keeps Cutting Out
-
Check Cable Connections
The WiFi connectivity issue with your range extender might also show up if the cable connections involved in the home network are improper. So, you are suggested to take a look at all the cables. Firstly, ensure that no cable is damaged. If any of them is found worn out or fragmented, you are suggested to replace it with a new one. But, you also need to be very sure that the cables you are using are genuine ones and that the connections created are nowhere near loose.
-
Cut Off WiFi Leeches
WiFi leeches, WiFi bandits, or freeloaders; are known by various names. But, their only task is to steal your WiFi connection. Maybe any WiFi bandit has connected to the network of your range extender due to which you are experiencing connectivity issues. So, you know what to do now. All you need to do for that is to log in to your range extender through the default login address and verify if what we’ve said is true or not. In case it turns out to be true, you need to identify them and block them from the home network.
The Bottom Line
Experiencing WiFi connectivity issues with a Wavlink WiFi range extender is a normal thing. And, resolving them is even more normal if you are familiar with the correct troubleshooting techniques to resolve them. It is now expected that you have successfully addressed the issue and your device is performing optimally.