Why Am I Seeing Red Light on My WiFi Router?

The LEDs on your WiFi router indicates different meanings. If the LEDs on your WiFi router are green, it means everything is good going. And, if all or anyone of the LED turns red from green, it indicates something big has happened and you really need to pay attention to your router. And, only because of this error you might get issues while accessing the router login page via 192.168.1.250 or 192.168.11.1 IP to make further changes to the device.

But, you don’t have to worry! This piece of writing can be of great help to you! Here, we have mentioned a number of troubleshooting tactics that will help you turn the red light into green on your router in a flash. Continue reading this post!

This guide is applicable for all router make and models to troubleshoot the red light issue!

Reasons: WiFi Router Red Light

Before you start with the process of troubleshooting the issue, we suggest you have a quick nudge at the reasons causing it:

  • Improper power supply

  • Your router is plugged into a damaged wall outlet

  • The distance between your router and the internet modem is too much

  • Your internet connection can also be one of the major culprits behind the “red light” issue

  • Technical glitches may also force you to face the issue in discussion

That’s all about the common reasons causing the red light issue! Now, you can scroll down a little and get to know the fixes to troubleshoot the issue in an instant. Keep reading this 3-minute read!

Fixed: WiFi Router Red Light Issue

Reboot Your WiFi Router

You can start troubleshooting the issue by power cycling your router as it is one of the easiest methods to troubleshoot any issue.

The process to power cycle or reboot the router is as follows:

  • Turn off your WiFi router and wait approximately 5-10 minutes.

  • After waiting for sufficient time, kindly turn the router on.

  • The LEDs on the router will start blinking green.

Here’s to hope that the LEDs of the router have not turned red. On the off chance, you are still facing the issue, then don’t delay much to try the next hack in line.

Provide Steady Power to Router

The main reason behind getting the red light issue can be poor power supply. So, to fix the issue and make the most out of your WiFi router, ensure that the wall socket in which it is plugged is in well working condition and supplying a non-interrupted and fluctuation-free power supply to your router.

Lessen the Router-Modem Distance

If the distance between your router and the internet modem is too much, then also you can experience the red light issue. Hence, to keep the issue at bay, you need to lessen the distance between your internet modem and your router.

After placing your devices at their appropriate location, connect them either wirelessly or using an Ethernet cable.

But there are a couple of points that you have to keep in consideration while connecting your devices:

  • While connecting your devices wirelessly, you must ensure that your internet connection is working fine.

  • And, while connecting your devices using a wired source, be certain that the Ethernet cable is working fine and inserted firmly into your router and the internet modem.

Here’s to hope that you have connected your devices in the best possible way. Want to verify? If yes, do the needful by accessing the router login page via 192.168.11.1 IP.

Check Your Internet

Slow internet can be one of the most common reasons behind seeing the red light issue on your router. So, contact the service provider of your internet connection right away and confirm if nothing is wrong from his end.

On the off chance, your ISP hasput the internet services down for maintenance or your internet pack has expired, kindly renew the internet plan and wait for everything to come back to normal.

No Luck?

Are you still seeing red light on your router? Ensure to set it up in the best possible way. Bear in mind, if you have not set up the router correctly, then also you may see the red light on it.

Apart from this, updating router’s firmware is very much important and that to on a regular basis. An outdated firmware leads to the red light issue for sure.

Was this article helpful?