Wavlink N300 Router Login And Configuration Process

Are you looking for information regarding the Wavlink N300 router setup? Then you visit the correct page. On this page, you will learn all the basic information about the login and setup information. We recommend you read this full page, without jumping any step. 

Access Wavlink N300 Router Web Management Page 

  • First, in the power socket settle the Wavlink N300 router device power plug. 
  • After that, take the computer and connect it to the Wavlink N300 router network. 
  • Now, open the navigation on your computer and enter wifi.wavlink.com web portal in the URL bar. 
  • Next, fill in all the details shown on the login page such as username and security password. 
  • In case you don’t know about the login details then check the manual booklet which comes with your Wavlink router device. 
  • In the end, hit on the login button to finish the Wavlink N300 router login process. 

Things Required Before Setup 

  • Required a modem, Wavlink router, and extender device. 
  • Also, grab one coaxial cable and two network/ethernet cables. 
  • Need a modem and router power cord. 

Connect Wavlink Router To The Modem

  • Initially, link one end of the coaxial cable to the wall plug and pair the remaining end of the cable with the modem. 
  • Next, place the modem power cord in an electrical socket. 
  • Now, join the ethernet cable at the back side of the modem device. 
  • After that, connect the remaining end of the ethernet cable to the Wavlink router WAN port. Then, set the router power cord in a power socket. 
  • Later, take another ethernet wire and connect it to the other Wavlink router port and the other end of the wire at the back of the computer. 
  • In the end, look at the LEDs on both gadgets. If the LED blinks solid then it means your Wavlink router device is successfully linked with the modem. 

 

Tip: If you want to do the wifi.wavlink.com router setup then you will need to visit the web management page and consider all the instructions which are shown on them. 

 

Tip: If you want to extend the range of the WiFi signal then consider the below information. 

Pair Wavlink Router With Extender 

  • First, settle your Wavlink router and extender device closer to the router. 
  • After that, look at the back side, there you can see the WPS button. 
  • Now, push that WPS button from the router’s panel. 
  • Next, inside in a few minutes press the extender WiFi-protected setup button. 
  • Further, WPS LED starts blinking solid on both the extender and router gadget. 
  • The solid WPS LED defines that both extender and router are successfully linked with each other. 

By Ethernet Cable Connect Extender To Router 

  • Initially, connect the ethernet cable to the Wavlink router ethernet port. 
  • After that, attach the other end of the ethernet cable to the extender ethernet port. 
  • Next, put the power plug of both the extender and router gadgets in the power socket. 
  • Now, on both the extender and router device solid blue LED starts blinking. It means the extender and router connect. 
  • Furthermore, take the computer and connect it to the extender network. 
  • Now, open the web browser and enter wifi.wavlink.com in the address bar. 
  • Later, fill in all the details shown on your display. 
  • Thereafter, pick the New Range extender setup option and under that select the WiFi network that you want to extend. 
  • Then, make the admin username and security password. 
  • In the end, tap on the connect button and wait for a short while to see the extender successfully connected notification on your on-screen display. 

Troubleshoot Wavlink Router Issues 

There are two ways to resolve the Wavlink router issues. 

 

To upgrade Wavlink Router Software 

  • First, you will need to visit the Wavlink router web management page. 
  • After that, look for an administration option. 
  • Next, tap on the router software upgrade option. 
  • If you see any latest software file then download it on your computer. 
  • Hence, the Wavlink router issue is now resolved. 

 

Reset Wavlink Router

  • At the back side of the Wavlink router device, you see the reset hole button. 
  • Push that button with the help of a paper clip. 
  • Now, all the LEDs of the Wavlink router will turn off. 
  • As it means, your Wavlink router device is now completely reset. 

 

Note: After the reset, you will need to do the Wavlink router setup process again. 

Fix Wavlink Extender Issues 

Power Cycle Wavlink Extender 

  • First, turn off your Wavlink WiFi range extender device. 
  • Now, put out the power plug of the Wavlink WiFi range extender from the power socket. 
  • After that, wait for a few minutes and turn on back your extender device. 
  • In the end, put back the Wavlink extender power plug in the electrical or wall socket. 

 

Remove WiFi Gadgets  Which Are Not In Use 

Due to many WiFi gadgets connecting to your extender network, your extender does not work properly. To fix this issue we recommend you remove all WiFi-containing gadgets which are not in use. If you don’t know how many WiFi-containing gadgets connect to your extender network then you will need to visit the web management page and hit on iFi connected device. Now, you can easily remove those devices that are not in use. 

 

As we expect, after the study of this entire page you will be able to Wavlink router login and configuration process by yourself without taking any technician expert. In case you face an issue then immediately resolve it by trying the above solution tips. Stay always closer or near this page.