Tyre Tread Maintenance and its Importance

It is really sad that a lot of road accidents just happen due to improper maintenance of vehicles. Indeed, road safety is closely related to proper maintenance. A lot of drivers overlook this vital aspect of road safety and later face the music.

Sometimes, things seem minor but they highly affect the quality of road safety. A good example of these things is tread depth. According to the experts, you have to maintain proper tread depth in your Bridgestone Tyres Peterborough to ensure road safety. They have a lot of solid reasons to support this advice.

The tread pattern is the most important part of your tyre. If you have ever observed, only this part of the tyre touches the road surface. So, you can easily imagine which part is responsible to provide proper grip and traction on roads.

Let us start the discussion with aquaplaning

However, proper grip is important on the dry grip as well but you need it more on wet roads. With a limited contact patch on the road surface, your tyres require to displace extra water to avoid aquaplaning.

Aquaplaning is a dangerous phenomenon in which the layer of water occurs between the tyre tread and road surface to eliminate the power of tread to maintain proper traction. As a result, your car starts to skid in the middle of the road.

The chances of aquaplaning are more likely if you are driving with tyres that do not have enough tread depth. Not many car drivers realise this fact and therefore, they face problems in the future.

Braking distance and tread depth

Besides, aquaplaning, tread depth is important for the braking distance of your tyres is as well. Braking distance is a vital part of road safety.

Sometimes, you have to stop your vehicle because the vehicle in front of you stops suddenly. In this case, your tyres should hold the road surface properly to stop the vehicle at the correct distance.

Usually, tyres with decreased tread depth do not have a reduced capacity to stop the vehicle at a proper distance.

Proper tread depth and tyre punctures

Deeper grooves reduce the chances of punctures in tyres. Thus, you can treat it as an additional benefit of proper tread depth. A sharp object like an iron nail can easily pierce the body of your Tyres Peterborough. Thus, you should drive with proper depth to protect your tyres from punctures.

Why do tyres become bald?

The minimum legal tread depth in the UK is 1.6mm. New tyres usually come with 6 to 8 mm of tread depth. The tread pattern will reduce gradually due to several factors.

When your tyres are excessively worn down, you have to change your tyres instantly. The following factors are responsible for making your tyres bald:


Tyres run on roads and generate friction. Friction is a double-edged sword. It is necessary to create the movement of tyres and it degrades their rubber material as well.


While you run your vehicle at high speeds, heat will decrease the tread quickly. The damaging effect of heat depends on the level of friction as well.


Treadwear is a normal process that takes place over time and you have no control over this process. Ageing of a tyre is a gradual process but the rate of wear fastens due to other damaging factors.

Improper inflation:

Treadwear also takes place due to improper inflation levels. Excessive hair pressure in the tyres will affect the middle part and low air pressure will cause tread wear in both inner and outer shoulders.

Incorrect wheel alignment and balancing:

If you drive your vehicle with wrong wheel alignment and wheel balancing for a long time, uneven tread wear will take place to affect the lifespan of tyres.

Check your tread depth regularly

You can ensure proper tread in your tyres by checking them at regular intervals. You can check the tread depth by using a tread depth gauge.

Leave a Reply

Your email address will not be published.