After completing the installation process of the Wavlink router, it is quite necessary to take some consideration points into account. In doing so, the router will start working with more power and optimized performance. These points will also help you to avoid working errors in the router. So, here are the tips that you must check out and try for your device.
Place The Router Ideally
However, during the Wavlink router login and setup, you need to place it closer to the existing modem for a successful process. However, it is necessary to relocate it after completing the setup to get rid of the WiFi dead spots. However, while doing this, it is mandatory to ensure that the router is within the range of the existing modem. So, neither place it too far from the modem nor too close.
Apart from that, keep in mind to choose a location where there must not be any electrical appliances. Which can interrupt the internet signals after absorbing them. These are smart TVs, Bluetooth devices, cordless phones, baby monitors, gaming consoles, and many more. So, try to place it above two feet of ground and centrally at your place to get better WiFi coverage.
Connect Your Device Strongly
At this point, try to make strong connections between your Wavlink router and the devices that are networked currently. For a wireless connection, keep checking if your device is connected to the official network or not. Whereas, in a wired connection, ensure to check the ethernet wires that you used to connect the devices. Also, check the ethernet ports of your device and the Wavlink router.
Make The Devices Compatible
For seamless connectivity, you must make your devices compatible with the router by making some changes in their settings. So, take your networked device open your preferred web browser, and clear its cookies, and caches. In addition, remove the malware files from your device and if there is any Antivirus installed then disable its firewall. You must perform the same process with your other devices on a frequent basis.
Change The Router’s Advanced Settings
Along with changing the device’s settings, you must make some modifications to the router’s wireless settings. So, reach out to the wavlink router set up web interference on the web browser, and choose the wireless settings option. Change the bandwidth channels, security encryption, and frequency bands as you desire and click on the Save button later. Here you also must change the network’s password to keep it safe from unauthorized users and hackers.
Update The Firmware Timely
The Wavlink support page offers the latest firmware versions for its products that help to improve the network performance. So, go to the router web interference again and see the latest firmware updates for your router model. If there is any availability, then download the file and execute the process later. In the end, reboot the router and it will start working with maximized performance now.
Keep Turned Off The Router
When the router is not in use you must turn it off and leave it turned off until you start using it again. Continuous usage of the router can overheat it and make it work slow or sluggish. So, whenever the router is not in use then try turning it off to give some rest to it. More than that, disconnect your devices that are not in use and are still connected to the Wavlink router setup network.
Reset The Router
If in any case, you experience troubles or errors while using the router or get slow speed of the internet, then take some basic troubleshooting tips first. Such as changing the router location, moving it closer to the modem, rebooting it, and reconnecting your devices. If you fail to resolve them even after attempting the resolving tips, then reset the router. This process will discard the errors for sure and also delete the currently installed settings as well.
So, locate the dedicated reset button on the router’s panel and it will be located probably on the side or back panel. Press that button and use a paperclip if needed to do that and wait for a few minutes. Once you see the blinking light on the panel wait for some time and let the reset process go on. Then, perform the wifi.wavlink.com setup from scratch after getting a stable light on it. Finally, follow the above-mentioned points again to improve the router’s working.
Thus, you will be successful in getting your router’s best performance after applying these tips. But, if you face any other issue with your device then contact our experts. They will help you with your product query and solve that in less time.