Belka Glass provides a number of high-quality solutions for glass railing system residential installations. This method of urban design permits the creation of landscapes with a sleek sophistication that draws attention to nature. All of our items, whether they be for indoor or outdoor use, are of the finest quality.
In only 3 easy steps
- Count the number of glass panels.
- Estimate the quantity of glass faucets you’ll require.
- Choose the handles and embellishments for the glasses.
1. Identify the number of windows.
Glass panel sizes vary from project to project. For swimmer security, a minimum finished height of 48 inches is suggested. A balcony glass railing must be at least 36 inches high. The minimum height for a interior glass railing systems on a residential balcony is 42 inches if the height of the balcony is more than 6 feet.
The standard width for an indoor glass railing system is 48 inches. In the specified configuration, 11 glass panels are required for the balustrade. It’s suggested that you wear glasses with a thickness of 10 or 12 millimeters.
Step 2: Count the Required Number of Glass Spigots
Glassware tap counts are simple to calculate. Each 48-inch-wide panel requires two water outlets. To support 11 panes of glass, you will need 22 spigots.
There are situations where bigger panes of glass might be better. Glass panels up to 60″ in width can be supported by two spigots. Three spigots per glass should be installed if its width is greater than this.
The glass fixtures can be installed on a wooden, fiberglass, or concrete patio. Remember that glass doesn’t require any holes to be drilled in it. The interior glass railing systems can be moved into position and then fixed with a set screw once the spigots have been installed on the ground.
Choose your faucets and glasses in Step Three.
Using high-quality materials will ensure that your project lasts a long time with minimum upkeep on your part. High-quality stainless steel spigots are your best bet for preventing corrosion. The bare minimum requirement is marine grade stainless steel (316) spigots. Our spigots are made from Duplex 2205 stainless steel, a premium grade with increased resistance against corrosion.
The spigots you choose must be strong enough to support the weight of theglass railing system residential and the force of the wind. It is important to check the weight of the spigots at this stage. For comparison, our deluxe spigot clocks in at a hefty 2.6 kilograms (around 7 pounds). Some shops and markets offer spigots that weigh close to 1.2 kg. This is not a reliable option for a safe glass railing system residential in the home.
To guarantee perfect alignment and a sturdy installation, connectors at either 90 or 180 degrees can be placed between glass panels in interior glass railing systems.
Unauthorized individuals can be kept out of a pool by the use of properly installed hinges and latches. This requires puncturing the eyewear in some way.