How To Connect Canon Printer To Wi-Fi Mg2922?

Wireless printing is quite an easy and convenient process. It saves you from all the hassle of connecting wires everywhere and connecting your devices every time you want to make a print. Canon printers have different models of wireless printers. The printer are quite reliable, Canon has always been one of the trusted brand in the market. Here, we will see how to connect Canon MG 2922 printer to Wi-Fi. There are different ways in which you can establish a connection between your device. The WPS and setup wizard are the two wireless setting up option. Let’s have a look at the steps.

Steps to connect Canon printer to Wi-Fi:

The set up might seem confusing at first, but the procedure is quite easy to follow and not that complicated as it may sound. Most of the routers have a WPS push button. It is there to sync a wireless printer. To connect the wireless printer using the WPS button, perform the following steps.

• Press and hold the Wi-Fi button on the router for a few seconds.
• Now, press the Start button and then the Wi-Fi button again.
• You should see that the on button is now lit up.
• Press down the WPS button.
• Your router and your printer are now in sync. Your Canon wireless printer set up is now complete.

If you need to make any print and connect the device to the printer, it is important that the printer should be first connected to the Wi-Fi network. It is also important that the connection between the device and Wi-Fi is strong and stable. Another thing to take care is that both the printer and the device must be connected to the same Wi-Fi network. If you are not able to establish the connection through the steps mentioned above, you can go through Canon Pixma MG 2922 manual setup. Let’s see the steps.

Steps for manual setup:

• Turn on your printer by pressing the power button on the printer.
• Then click on the settings button and use the up and down arrow button to navigate to settings.
• Go to device settings and click ok.
• As you press the arrow button looking for options, press ok when you see LAN settings.
• Then click ok on wireless LAN settings.
• The printer will look for the available Wi-Fi connections nearby.
• You will see the name of your network in the list of devices, click ok.
• Then, enter the password for your Wi-Fi.
• Press ok and you will see the word, connected on screen.

This is how you can manually connect your printer to the Wi-Fi. The process as we saw is quite simple. You must be cautious while entering the login credentials. The password is case sensitive and if there is any error in typing. The printer might fail to make a connection to the Wi-Fi. Whenever you connect new devices to your printer, make a test print to check for any error.