Easy Steps To Connect Your Canon Pixma Mg2522 Printer to Wi-Fi

Every aspect of our lives nowadays is online and digitalized. There is an increase in dependence on internet. All of this requires a good Wi-Fi network. Along with that, printers are also an important part of any office or home setup. You do require printed documents and images for any official documentations or school projects. Canon printers are known to be as a most reliable printer brand in the market due to its high speed and quality printing. It makes printing very easy from any device to which it is connected. Installing Canon MG2922 is a bit tricky. Make sure that your printer is placed near the router for better connectivity. Here, we’ll have a loon at the process of how to connect Canon MG2522 printer to Wi-Fi. In order to begin printing your printer must be connected to the Wi-Fi. You have to make sure the printer and the device through which you are printing is connected to the same Wi-Fi network. Let’s have a look at the steps.

Steps to connect Canon printer to Wi-Fi:

If your installing your printer for the first time. Connect the power cord and the plug to the socket. Install the ink cartridges and then switch on the printer. The printer comes with a screen. Now, you can search for connecting the printer through a wireless network. Then, follow the steps mentioned below.

  • Go to settings and then press, “Network settings”.
  • Select ‘Wireless setup Wizard’ after this the printer will start finding networks.
  • Chose your Wi-Fi network name and enter your password.
  • Your printer is now connected to Wi-Fi.

There’s more than one way through which you can establish a connection between your printer and Wi-Fi. Another common and convenient ways of how to connect Canon MG2522 printer to Wi-Fi is following the WPS method. You have to enable the WPS buttons on your printer and router to connect the device through the settings. Here are the steps for the same.

  • On the modem, press the WPS button for a few seconds.
  • Your printer will automatically find the network and get connected to it.
  • If the network is password protected. Press the WPS button till the light is stable and enter your password.

After completing the process, you also have to connect your printer to the computer.

Steps to connect Canon printer to computer:

  • Turn on your computer
  • There must be a Wi-Fi button on your printer. Press and hold it for few seconds.
  • Once you see the amber lights flashing, press the WPS button on your router.
  • Wait until the light is steady. This would confirm the successful connection to the Wi-Fi network.
  • There must be a CD in the package when you purchased the printer. Load the CD in to your computer.
  • There might be chance that you did not receive the CD or misplaced it. In that case, download the printer driver directly from official Canon website.
  • Set the connection method to Access point connection, click next.
  • There is a guided process on screen, follow the instructions carefully until the Installation process is complete.
  • Start aligning the print head and then click on Next.

The setup of your Canon printer is now complete. You can begin printing through the Canon printer.

One thought on “Easy Steps To Connect Your Canon Pixma Mg2522 Printer to Wi-Fi

Leave a Reply

Your email address will not be published. Required fields are marked *